Structural Characteristics and Deformation Behavior of Porous Titanium Prepared by Sintering

封面

如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

We have studied characteristic structural features of PTM-1 and PTS-1 titanium powders and related porous materials prepared by sintering the powders and determined quantitative characteristics of the pore system in the sintered materials. Macro- and microstructural features of the porous alloys have been shown to correlate with their deformation and strength parameters. The materials have been characterized by scanning electron microscopy, X-ray diffraction, and stereometric techniques, and their strength characteristics have been studied in compression tests. The porous material prepared by sintering the PTM-1 titanium powder has been found to have better principal strength and deformation characteristics owing to its lower porosity in comparison with the material obtained by sintering PTS-1 and to dispersion hardening by TiC particles in the structure formation process.

作者简介

S. Anikeev

National Research Tomsk State University, 634050, Tomsk, Russia

Email: Anikeev_Sergey@mail.ru
Россия, 634050, Томск, пр. Ленина, 36

N. Artyukhova

National Research Tomsk State University, 634050, Tomsk, Russia

Email: Anikeev_Sergey@mail.ru
Россия, 634050, Томск, пр. Ленина, 36

M. Kaftaranova

National Research Tomsk State University, 634050, Tomsk, Russia

Email: Anikeev_Sergey@mail.ru
Россия, 634050, Томск, пр. Ленина, 36

V. Khodorenko

National Research Tomsk State University, 634050, Tomsk, Russia

Email: Anikeev_Sergey@mail.ru
Россия, 634050, Томск, пр. Ленина, 36

A. Garin

National Research Tomsk State University, 634050, Tomsk, Russia

Email: Anikeev_Sergey@mail.ru
Россия, 634050, Томск, пр. Ленина, 36

E. Marchenko

National Research Tomsk State University, 634050, Tomsk, Russia

编辑信件的主要联系方式.
Email: Anikeev_Sergey@mail.ru
Россия, 634050, Томск, пр. Ленина, 36

参考

  1. Jackson M.J., Kopac J., Balazic M., Bombac D., Brojan M., Kosel F. Titanium and Titanium Alloy Applications in Medicine // Surg. Tools Med. Devices. 2016. P. 475–517. https://doi.org/10.1007/978-3-319-33489-9_15
  2. Ik-Hyun O., Haruhiko S., Naoyuki N., Shuji H. Microstructures and Mechanical Properties of Porosity-Graded Pure Titanium Compacts // Mater. Trans. 2003. V. 44. № 4. P. 657–660. https://doi.org/10.2320/matertrans.44.657
  3. Zschommler Sandim H.R., Morante B.V., Suzuki P.A. Kinetics of Thermal Decomposition of Titanium Hydride Powder Using in situ High-Temperature X-ray Diffraction (HTXRD) // J. Mater. Res. 2005. V. 8. № 3. P. 293–297. https://doi.org/10.1590/S1516-14392005000300012
  4. In-Shup A., Tek-Kyoung S., Sung-Yeal B., Ho-Jung C., Dong-Kyu P. Synthesis of Titanium Carbide by Thermo-Chemical Methods with TiH2 and Carbon Black Powders // Met. Materials Int. 2006. V. 12. № 3. P. 249–253. https://doi.org/10.1007/BF03027539
  5. Vasconcellos L.-M.-R., Leite D.-de O., Nascimento F.-O., de Vasconcellos L. G.-O., etc. Porous Titanium for Biomedical Applications: An Experimental Study on Rabbits // Med. Oral, Patol. Oral Cirygia Bucal. 2010. V. 15. № 2. P. 407–412. https://doi.org/10.4317/medoral.15.e407
  6. Frykholm R., Brash B. Press and Sintering of Titanium // Key Eng. Mater. 2015. P. 1–11. doi: 10.4028/ href='www.scientific.net/KEM.704.369' target='_blank'>www.scientific.net/KEM.704.369
  7. Krinitcyn M.G., Pribytkov G.A., Korosteleva E.N. Structure of Sintered Ti – TiC Materials // Appl. Mech. Mater. 2014. V. 682. P. 127–131. https://doi.org/10.4028/www.scientific.net/AMM.682.127
  8. Назаренко В.А. Материалы на основе титана, полученные методами порошковой металлургии // Вестн. донбасской машинообувной технологии. 2010. Т. 2. № 19. С. 203–207.
  9. Stráský J., Kozlík J., Bartha K., Preisler D., Chráska T. Sintering of Ti-Based Biomedical Alloys with Increased Oxygen Content from Elemental Powders // The 14th World Conference on Titanium. MATEC Web of Conferences 321. 2020. 05010. https://doi.org/10.1051/matecconf/202032105010
  10. Milenov T., Terziyska P., Avdeev G. et al. Structure and Phase Composition Study of Heavy Doped with Carbon Thin Films of TiO2: C Deposited by RF Magnetron Sputtering // Russ. J. Inorg. Chem. 2022. V. 67. P. 1509–1520. https://doi.org/10.1134/S0036023622100333
  11. Kamynina O.K., Kravchuk K.S., Lazov M.A. et al. Effect of Surface Roughness on the Properties of Titanium Materials for Bone Implants // Russ. J. Inorg. Chem. 2021. V. 61. P. 1073–1078. https://doi.org/10.1134/S0036023621080106
  12. Pease L.F. III, West W.G. Fundamentals of Powder Metallurgy: Metal Powder Industries Federation, 2002. 452 p. https://doi.org/10.2298/SOS0401054P
  13. Zhao Q., Bolzoni L., Chen Y., Xu Y., Torrens R., Yang F. Processing of Metastable Beta Titanium Alloy: Comprehensive Study on Deformation Behavior and Exceptional Microstructure Variation Mechanisms // J. Mater. Sci. Technol. 2022. V. 126. P. 22–43. https://doi.org/10.1016/j.jmst.2022.02.050
  14. Шаповалова О.М., Бабенко Е.П. Исследование структуры и свойств кристаллов рафинированного титана повышенной частоты при нагреве // Вестн. двигателестроения. 2009. № 1. С. 134–138.
  15. Шаповалова О.М., Бабенко Е.П. Система исследования порошковых материалов // Проблемы cовременного материаловедения. 2001. С. 33–34.
  16. Кисеев В.М., Непомнящий А.С. Способ получения пористого титана. RU 2407817 C2, 2010.
  17. Krishna E.S., Suresh G. Bioactive Titanium-Hydroxyapatite Composites by Powder Metallurgy Route // Biointerface Res. Appl. Chem. 2022. V. 12. № 4. P. 5375–5383. https://doi.org/10.33263/BRIAC124.53755383
  18. Сенкевич К.С. Способ получения пористых изделий из быстрозакаленных порошков титана и его сплавов. RU 2641592 C2, 2018.
  19. Vander Voort G. Metallographic Preparation of Titanium and its Alloys // Solutions Mater. Prep., Test. Anal. 2014. V. 3. № 3. P. 828–834.
  20. Froes F.H., Mashl S.J., Moxson V.S., Hebeisen J.C., Duz V.A. The Technologies of Titanium Powder Metallurgy // J. Minerals. 2004. V. 56. P. 46–48.
  21. Robertson I.M., Schaffer G.B. Comparison of Sintering of Titanium and Titanium Hydride Powders // Powder Metall. 2010. V. 53. № 1. P. 12–19. https://doi.org/10.1179/003258909X12450768327063
  22. Blaine D.C., Heleon H.B., Laubscher H.H. Process Models for Press-and-Sinter Titanium // Adv. Mater. Res. 2014. V. 1019. P. 231–240. doi: 10.4028/ href='www.scientific.net/AMR.1019.231' target='_blank'>www.scientific.net/AMR.1019.231
  23. Sun P., Fang Z.Z., Zhang Y., Xia Y. Review of the Methods for Production of Spherical Ti and Ti Alloy Powder // JOM. 2017. V. 15. P. 1853–1860. https://doi.org/10.1007/s11837-017-2513-5
  24. Whittaker D. Powder Processing, Consolidation and Metallurgy of Titanium // Powder Metall. 2012. V. 55. № 1. P. 6–10. https://doi.org/10.1179/174329012X13297486041231
  25. Lei Ch., Du Y., Zhu M., Huo W., Wu H., Zhang Y. Microstructure and Mechanical Properties of in situ TiC/Ti Composites with a Laminated Structure Synthesized by Spark Plasma Sintering // Mater. Sci. Eng., A. 2021. V. 812. P. 141136. https://doi.org/10.1016/j.msea.2021.141136
  26. Шляпин С.Д., Серов М.М., Гусев Д.Е., Федорова Л.В. Получение, структура и свойства пористых материалов из титановых волокон и проволоки // Изв. вузов. Порошковая металлургия и функциональные покрытия. 2016. T. 4. С. 76–85. https://doi.org/10.17073/1997-308X-2016-4-76-85
  27. Gonçalves V.R.M., Çaha I., Alves A.C., Toptan F., Rocha L.A. Improved Tribocorrosion Behavior Obtained by in-situ Precipitation of Ti2C in Ti–Nb Alloy // Metals. 2022. V. 12. P. 2–17. https://doi.org/10.3390/met12060908
  28. Priti W., Drew R., Root J., Yue S. Evidence for Stable Stoichiometric Ti2C at the Interface in TiC Particulate Reinforced Ti Alloy Compounsites // Acta Mater. 2020. V. 48. № 7. P. 1443–1450. https://doi.org/10.1016/S1359-6454(99)00453-X
  29. Zhang C., Zhang L., Liu L., Linwei Lv., Gao L., Liu N., Wang X., Ye J. Mechanical Behavior of a Titanium Alloy Scaffold Mimicking Trabecular Structure // J. Orthop. Surg. Res. 2020. V. 15. № 40. P. 1–11. https://doi.org/10.1186/s13018-019-1489-y
  30. Li B.Q., Wang C.Y., Lua X. Effect of Pore Structure on the Compressive Property of Porous Ti Produced by Powder Metallurgy Technique // Mater. Des. 2013. V. 50. P. 613–619. https://doi.org/10.1016/j.matdes.2013.02.082
  31. Chai H.W., Xie Z.L., Feng Z.D., Luo S.N., Huang J.Y. Three-Dimensional Deformation Dynamics of Porous Titanium under Uniaxial Compression // Mater. Charact. 2021. V. 182. 111494. https://doi.org/10.1016/j.matchar.2021.111494
  32. Симонов Ю.Н., Георгиев М.Н., Симонов М.Ю. Основы физики и механики разрушения. Пермь: Изд-во Перм. нац. исслед. политехн. ун-та, 2012. 203 с.
  33. Hull D., Bacon D.J. Introduction to Dislocations. Amsterdam: Elsevier, 2011. P. 272.

补充文件

附件文件
动作
1. JATS XML
下载
2.

下载 (1MB)
索引源数据
3.

下载 (1MB)
索引源数据
4.

下载 (829KB)
索引源数据
5.

下载 (322KB)
索引源数据
6.

下载 (1MB)
索引源数据
7.

下载 (2MB)
索引源数据
8.

下载 (2MB)
索引源数据
9.

下载 (773KB)
索引源数据
10.

下载 (126KB)
索引源数据
11.

下载 (136KB)
索引源数据

版权所有 © С.Г. Аникеев, Н.В. Артюхова, М.И. Кафтаранова, В.Н. Ходоренко, А.С. Гарин, Е.С. Марченко, 2023